License plate frame

Toyota Rav4 EV Forum

Help Support Toyota Rav4 EV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

asavage

Well-known member
Supporting Member
Joined
Aug 7, 2017
Messages
439
Location
Oak Harbor, Wash.
I don't normally go for bumper stickers and such, but I was reviewing custom license frames and bought one on a whim.



As constructed, there is too much depth to the frame and the plate can rattle in the frame. The rear of the frame can damage paint. I installed vinyl bumpers on the back to prevent damage to my tailgate. A bit of LocTite to prevent the screws from backing out (because you can't really tighten them with all that air behind the frame, without distorting the frame) and a couple button-head SS screws from the local hardware store . . .



I'm not really a bling kinda man, but I admit that I like this.
 
Back
Top