Recent content by ogmm

I'm having the same codes (di_w020 / di_f020) and the same issue power loss after a couple of minutes of driving. The car ran perfectly for five years until now. Did replacing the sensor worked for you?

Thank you miimura maybe you can share your DBC file or GitHub, it will very helpful. Also if someone knows which is the ID for enable the battery internal contactor and/or Switch the BMS to charging mode, it will highly appreciated.

Its been a long time. Working hardware: 1)arduino nano and two MCP2515 modules(some PIDs seems to be missing due Nano performance. Can't be used with Savvycan tool) 2)arduino due and two sn65HVD230 modules(better performance than nano and can be use Savvycan directly to inyect your own PIDs...

although on several sites seems to be a simple cisco ethernet usb adapter. http://alflash.com.ua/phpBB2/download/file.php?id=2963&sid=245c80eccc8c3b512c331c5ddd3e239e&mode=view see page 12: https://static.nhtsa.gov/odi/tsbs/2013/SB-10060730-2280.pdf on this video from Alltech, pins used are...

I saw the pinout for the back DLC3 port and seems to be a RJ-45 ethernet connector on the other side, but the voltage levels seems to be different. Should it work on any ethernet port and what program are beeing using for datalogging?