Check cruse control warning

Toyota Rav4 EV Forum

Help Support Toyota Rav4 EV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sbportech

Active member
Joined
Apr 27, 2014
Messages
43
Location
Solvang, CA
For the third time I have seen a "check cruse control" message on the dash. I pull over shut the car off and back on and the. The CC works. Anyone else have this issue. I'll have toyota scan it at the 10k service if it is not something that may lead me to get stranded. Thanks
 
sbportech said:
For the third time I have seen a "check cruse control" message on the dash. I pull over shut the car off and back on and the. The CC works. Anyone else have this issue. I'll have toyota scan it at the 10k service if it is not something that may lead me to get stranded. Thanks
had it once.
Was in a 25 mile zone, and CC only starts @25 miles.
I assume it was too close to begin speed or something.
After power-cycle everything was back to normal
 
I think another "Check Cruise Control" error trigger is to start pushing the accelerator just as you hit cancel. The reason I did this was to blend the accel to zero torque instead of it going to full regen upon cancel. I believe the car thinks there is a problem with the pedal linkage or something because it did not return to the zero position.
 
Back
Top